FC465-16 Aeroquip Conductive PTFE Tube Stainless Steel Single Wire Bra — HoseWarehouse

4.8

(312)

Write Review

$ 19.00

Add to Cart

Qty

In stock

Description

FC465-16 Aeroquip Conductive PTFE Tube Stainless Steel Single Wire Braid Hose is for steam, compressor discharge, and most chemical applications. It features a stainless steel single wire braid.

SPECIFICATIONS

Application:	Steam, compressor discharge and most chemcical applications. Not recommended for steam-cold water cycling.	SAE Rating:	Conductive SAE 100R14B
Other Ratings:	FDA Compliant per 21CFR178.3297	Tube:	Conductive extruded black PTFE
Reinforcement:	Stainless steel single wire braid	Cover:	Stainless Steel Braid
Temperature Range:	-73°C to + 260°C (-100°F to +500°F)	Crimp Fittings:	Crimp Fittings
Reusable Fittings:	Reusable Fittings	Skive Fittings:	N/A

Part Number	Hose I.D. (in)	Hose O.D. (in)	Max. Operating Pressure(PSI)	Min. Burst Pressure(PSI)	Min. Bend Radius	Vacuum Service	Weight of Hose (Lbs/Ft)
FC465-03	0.14	0.25	3000	12000	1.50	28	0.04
FC465-04	0.19	0.30	3000	12000	2.00	28	0.06
FC465-05	0.26	0.37	3000	12000	3.00	28	0.08
FC465-06	0.32	0.43	2500	10000	4.00	28‡	0.10
FC465-08	0.42	0.54	2000	8000	5.25	28‡	0.12
FC465-10	0.51	0.63	1500	6000	6.50	28‡	0.16
FC465-12	0.64	0.76	1200	4800	7.75	28‡	0.18
FC465-16	0.88	1.03	1000	4000	9.00	12‡	0.26
FC465-20	1.12	1.29	625	2500	16.00	12‡	0.34

‡ Maximum negative pressure for -06 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are required for -06 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger PTFE hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected. Note: Every attempt has been taken to provide accurate detailed usable information online, however please consult Eaton and Eaton Aeroquip handbooks for the most accurate and up to date data and specifics. All liability of Eaton products warrantied and guaranteed by manufacturer. Warning! Eaton hose and fittings are engineered to match Eaton Aeroquip hose and fitting tolerances. The use of Eaton fittings on hose supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended or authorized by Eaton Corporation, Murdock Industrial Inc., or any other entity. Consult current master catalog for additional warnings and cautions. Bulk / By the Foot : We sell hose in Bulk Lengths unless you agree to purchase at a by the foot price as listed above in an options selector. This means we make every effort to provide exact single lengths, however with Eaton Aeroquip guidelines on bulk hose, your order may come in multiple lengths and may be plus or minus 10% of your bulk order. If you require ONE length in a specific length you must specify by the drop down selector that you will be paying a premium for a single length. There are no exceptions to the bulk guidelines and all prices listed on our website are in bulk price. By ordering through our website you agree that you have read, fully understand and agree to these terms and conditions.